INFORMATION

Industry news

Location:Home >> News >> Industry news

Does the wedge between the head and handle of a claw hammer need regular replacement?

time:2026-10-22   Views:22

Should the wedges (steel wedge / wooden wedge) of a claw hammer with a wooden handle be replaced regularly?

Wedges are only used on solid wood handles. Fiberglass handles and one-piece steel handles have no wedges and require no such maintenance.

  1. What is the function of the wedge? The top of the wooden handle is split. A wooden wedge plus a transverse steel wedge are driven in to expand the wooden handle so that it fits tightly inside the hole of the hammer head and prevents the hammer head from flying off. Wedges are not consumables. They have no fixed replacement interval and do not require regular replacement. Maintenance is only needed when faults occur.

  2. When should the wedge be replaced or re-driven? Take action if any of the following situations appear:

  • Loose hammer head: Hold the handle and shake it hard back and forth. If the hammer head has clearance and moves, you will feel slack and loose during striking.

  • The wedge comes loose, sticks up, breaks or falls out.

  • Cracks at the top of the wooden handle widen, and the wedge can no longer hold the hammer head tight.

  • The wood around the hammer eye dries and cracks, rendering the wedge ineffective.

For slight looseness: New wedges can be hammered in directly for reinforcement; removing the old wedge is not always necessary. If the wooden handle is severely cracked, replace the entire handle directly. Replacing only the wedge will not work.

  1. Simple daily inspection Check briefly before every use:

  • Whether wedges stick out or crack

  • Whether the hammer head wobbles

  • Whether new cracks appear on the handle end


Copyright© Linyi Tongya Hardware Co., Ltd .

Technical Support:fangyuanwangtong

鲁ICP备17号-1

鲁公网安备 37号

XMLmap